2026 John Deere 844 P

3 hrs · Oklahoma City

2026 John Deere 844 P wheel loader. 3 hours. Listed from Oklahoma City, OK. Asking $640,037.

Asking: $640,037
Hours: 3

Location: Oklahoma City, OK
Listed by: CL Boyd

Sales: (405) 873-7772 Text Email: sales@trackandblade.com

Sales desk 9 to 5 Central · Live Agent 24/7

Essentials

Class: Wheel Loaders
Engine: 13.55L 419 HP Turbocharged & Charge Air Cooled FT4 John Deere Diesel Engine with Chrome Exhaust Stack
Yard: Oklahoma City, OKSee what else is here.
Sale: No bidding · no premium
Listed by: CL Boyd

Specification

Engine manufacturer and model	John Deere JD14
Non-road emission standard	EPA Final Tier 4 (FT4)/EU Stage V
Cylinders / valves per cylinder	6 / 4
Displacement	13.55 L
Seller-stated	419 hp
OEM (net, ISO 9249)	311 kW (417 hp) at 1,400 rpm
Net peak torque (ISO 9249)	2119 Nm (1,563 lb.-ft.)
Net torque rise	44%
Fuel system	Electronic High-Pressure Common Rail (HPCR)
Lubrication	Full-flow spin-on filter and integral cooler
Air cleaner	Dual-element dry type, restriction indicator in cab monitor; additional centrifugal engine pre-cleaner
Fan drive	Hydraulically driven, proportionally controlled, fan aft of coolers; automatic reversing fan drive
Batteries (2 x 12 volt)	1,400 CCA each
Transmission	Countershaft-type PowerShift with lockup torque converter
Torque converter	Single stage, dual phase with freewheeling stator with lockup clutch
Shift control; shift modes	Electronically modulated, adaptive, load and speed dependent; Manual/auto (1st–5th or 2nd–5th); Quick-Shift button with 2 selectable modes: kick-down or kick-up/down; and 4 settings for clutch cutoff
Maximum travel speed forward, ranges 1 / 2 / 3 / 4	6.5 km/h / 11.4 km/h / 17.4 km/h / 24.8 km/h (4.0 mph / 7.1 mph / 10.8 mph / 15.4 mph)
Maximum travel speed forward, range 5 (top speed)	40.0 km/h (24.9 mph)
Maximum travel speed reverse, ranges 1 / 2 / 3	6.4 km/h / 11.4 km/h / 24.9 km/h (4.0 mph / 7.1 mph / 15.5 mph)
Final drives	Heavy-duty mid-board planetary
Service brakes (ISO 3450)	Outboard, forced oil cooled, multi disc
Parking brake (ISO 3450)	Automatic spring applied, hydraulically released, sealed wet multi disc
Tire listed in the spec table	Michelin 875/65R29, 1 Star L-3
Tread width, Michelin 875/65R29 1 Star L-3	2440 mm (96.1 in.)
Width over tires, Michelin 875/65R29 1 Star L-3	3408 mm (134.2 in.)
Fuel tank (ground-level fueling)	534 L (141 gal.)
Diesel exhaust fluid (DEF), FT4/Stage V only	26.3 L (6.9 gal.)
Transmission reservoir with vertical filter	28 L (29.5 qt.)
Axle oil, front and rear, each	68 L (72 qt.)
Hydraulic reservoir and filter	181.7 L (48 gal.)
Loader pumps	2 variable-displacement, load-sensing axial-piston pumps; closed-center system
Loader maximum rated flow at 6895 kPa (1,000 psi) and 2,000 rpm	570 L/m (150.5 gpm)
System relief pressure, loader and steering	24 900 kPa (3,611 psi)
Steering pump maximum rated flow at 6895 kPa (1,000 psi) and 2,000 rpm	199.5 L/m (52.7 gpm)
Steering (ISO 5010)	Power, fully hydraulic; single-lever control and adjustable wristrest with conventional steering wheel override
Articulation angle	80-deg. arc (40 deg. each direction)
Turning radius (to centerline of outside tire)	6.30 m (20 ft. 8 in.)
Hydraulic cycle times: raise / dump / lower (float down) / total	5.9 sec. / 1.9 sec. / 3.6 sec. / 11.4 sec.
A Height to top of cab	3.73 m (12 ft. 3 in.)
B Hood height	2.74 m (9 ft. 0 in.)
C Ground clearance	463 mm (18.2 in.)
D Length from centerline to front axle	1.85 m (6 ft. 1 in.)
E Wheelbase	3.70 m (12 ft. 2 in.)
G Height to hinge pin, fully raised (Standard-Lift)	4.60 m (15 ft. 1 in.)
F Overall length, bucket on ground, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	9.79 m / 9.86 m / 10.17 m (32 ft. 1 in. / 32 ft. 4 in. / 33 ft. 4 in.)
H Dump clearance, 45 deg., full height, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	3.24 m / 3.18 m / 2.98 m (10 ft. 8 in. / 10 ft. 5 in. / 9 ft. 9 in.)
I Reach, 45-deg. dump, full height, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	1.52 m / 1.57 m / 1.80 m (5 ft. 0 in. / 5 ft. 2 in. / 5 ft. 11 in.)
J Reach, 45-deg. dump, 2.13-m (7 ft. 0 in.) clearance, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	2.30 m / 2.33 m / 2.47 m (7 ft. 7 in. / 7 ft. 8 in. / 8 ft. 1 in.)
K Maximum digging depth, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	111 mm / 124 mm / 124 mm (4.4 in. / 4.9 in. / 4.9 in.)
L Maximum rollback at ground level, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	45.3 deg. / 45.3 deg. / 40.2 deg.
M Maximum rollback, boom fully raised, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	59.8 deg. / 59.8 deg. / 57.4 deg.
N Maximum bucket dump angle, fully raised, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	45.8 deg. / 46.2 deg. / 46.1 deg.
Loader clearance circle, bucket carry position, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	15.00 m / 15.06 m / 15.16 m (49 ft. 3 in. / 49 ft. 5 in. / 49 ft. 9 in.)
Bucket capacity, heaped, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	5.7 m3 / 6.1 m3 / 4.8 m3 (7.5 cu. yd. / 8.0 cu. yd. / 6.3 cu. yd.)
Bucket capacity, struck, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	4.7 m3 / 5.0 m3 / 4.1 m3 (6.2 cu. yd. / 6.6 cu. yd. / 5.4 cu. yd.)
Bucket weight, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	3181 kg / 3222 kg / 4240 kg (7,013 lb. / 7,103 lb. / 9,348 lb.)
Bucket width, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	3.46 m / 3.45 m / 3.49 m (11 ft. 4 in. / 11 ft. 4 in. / 11 ft. 6 in.)
Breakout force, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	20 287 kg / 19 371 kg / 16 879 kg (44,725 lb. / 42,706 lb. / 37,212 lb.)
Tipping load, straight, no tire deflection, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	23 889 kg / 23 709 kg / 23 474 kg (52,666 lb. / 52,269 lb. / 51,751 lb.)
Tipping load, straight, with tire deflection, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	21 739 kg / 21 576 kg / 21 361 kg (47,926 lb. / 47,567 lb. / 47,093 lb.)
Tipping load, 40-deg. full turn, no tire deflection, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	20 597 kg / 20 436 kg / 20 060 kg (45,409 lb. / 45,064 lb. / 44,225 lb.)
Tipping load, 40-deg. full turn, with tire deflection, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	18 743 kg / 18 597 kg / 18 255 kg (41,321 lb. / 40,999 lb. / 40,245 lb.)
Rated operating load, 50% full-turn tipping load with tire deflection (ISO 14397-1), 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	9371 kg / 9299 kg / 9127 kg (20,660 lb. / 20,501 lb. / 20,122 lb.)
Operating weight, 5.7 m3 (7.5 cu. yd.) enhanced-performance with wear liners, bolt-on edge	71,516 lb.
Operating weight, 6.1 m3 (8.0 cu. yd.) enhanced-performance with wear liners, bolt-on edge / 4.8 m3 (6.3 cu. yd.) spade-nose rock with wear liners, teeth and segments	32 449 kg / 33 851 kg (71,538 lb. / 74,629 lb.)

Equipment on this unit

Operators Station: ROPS
Operators Station: Cab w/ AC
Operators Station: Joy Stick Steer
Operators Station: Joystick Controls
Powertrain: Power Shift w/ Lockup Trans
Powertrain: Dual Diff Locks
Powertrain: Auto Diff Lock
Tires: 29.5 Tires
Tires: Radials
Buckets: General Purpose Bkt
Options: Auto Lube
Options: SmartWeigh
Options: Tire Pressure Monitoring System
Options: Rear Camera
Options: Multi-Camera
Options: Rear Object Detection

Notes on this unit

13.55L 419 HP Turbocharged & Charge Air Cooled FT4 John Deere Diesel Engine with Chrome Exhaust Stack
8.00 YD (Enhanced Performance Bucket with Liner & BOCE
Bridgestone VJT - 29.5R25 L3 1-Star Radial Tires w/ 5 PC Rims
Full Coverage Front & Rear Fenders w/ Mudflaps
Quick Fluid Service w/ Environmental Drain
Beacon Light (Amber) - Seat Belt Indicator Beacon Light (Green) - Fire Extinguisher - Slow Moving Vehicle...
SmartWeigh Scale System
Main Counterweight & Rear Hitch w/ Pin
30 Amp Converter - LED Work and Drive Lights - Premium, Heated and Ventilated Seat w/ Heavy Duty Air Suspension - Premium Radio (AM/FM/WB) w/ Bluetooth and Remote Aux/USB Ports - Tire Pressure Monitor
Axle Cooling - Throttle Lock
JDLink Cellular Telematics with Machine Alert Monitoring Services

F.A.Q.

(405) 873-7772 sales@trackandblade.com

Sales desk is 9 to 5 Central. Live Agent is on 24/7 — call, text, or chat.